“The EU Packaging Regulation amends the element that could be considered as the fundamental factor in ERP: the subject of the obligation.”
While in Spain we were still interpreting and beginning to apply the new Royal Decree 1055/2022, of 27 December 2022, on packaging and packaging waste (the ‘RDERE’), which introduced significant innovations in the field of extended producer responsibility (EPR), such as its extension to commercial and industrial packaging, the European Parliament and the Council passed Regulation (EU) 2025/40 of 19 December 2025, on packaging and packaging waste (EU Packaging Regulation), amending some of the aspects recently regulated by the Spanish State.
In particular, the EU Packaging Regulation amends the element that could be considered as the fundamental factor in ERP: the subject of the obligation.
EPR meant a change in who was obliged to organise and manage waste: from the producer of the waste to the producer of the product that was put on the market for the first time and that would, at the end of its life cycle, become waste. This transfer was carried out under the aegis of the general principle of Law governing waste: “the polluter pays”, and meant a change in how the polluter was identified.
However, in contrast to other waste streams subject to EPR (electrical and electronic equipment, batteries and fuel cells, tyres and oils), in the sphere of packaging the producer of the product was held to be not the party that placed the packaging on the market for the first time, but rather the producer of the packaged product.

However, the texts of the successive draft versions of the EU Packaging Regulation amended the status of packaging product producer in force in Europe since the end of the 20th century, to identify the packaging manufacturer as such for the first time. However, probably taking into account the radical revolution that this change would bring about in the operation of EPR throughout Europe, in the last and final version the identification of the party subject to the extended producer obligations was only partially amended.
Thus, while Articles 2.t) and 2.e) of the RDERE, in keeping with the legal tradition that began with Spain’s Act 11/1997, of 24 April 1997, on Packaging and Packaging Waste (the “Ley de Envases y Residuos de Envases”, or hereinafter “LERE”), identify the product producer as the party that first places a packaged product on the market, not the packaging itself, Article 45 of the EU Packaging Regulation imputes extended producer responsibility to the “producers” of both the packaged products and, for the first time, the packaging itself. For its part, Article 3.15 of Regulation (EU) 2025/40 addresses the definition of producer in coherence with the aforementioned Article 45, basing this condition not only on the first placing on the market of packaged products, but also, as a new development, of certain empty packaging: “any manufacturer, importer or distributor to whom, irrespective of the selling technique used, including by means of distance contracts, one of the following applies”, including placing on the market for the first time in the territory of a Member State of transport packaging, service packaging, or primary production packaging, whether as single-use packaging or as reusable packaging, as well as packaged products other than the foregoing.
EU Regulation 2025/40 justifies this differentiation in recital 122, where it indicates:
[…] “This Regulation seeks to clearly define one producer per packaging unit, whether it is for empty packaging or for packaging containing products.As a general rule, the producer should be the economic operator who, as a manufacturer, importer or distributor established in a Member State, makes available packaged products from within the territory of that Member State and on that same territory” […] “However, to minimise any unnecessary administrative burden for small businesses that fill transport packaging, primary production packaging or service packaging, whether as a single-use packaging or as reusable packaging, at the point of sale, the producer should be the manufacturer, distributor or importer of such packaging that makes the packaging available for the first time from within the territory of the Member State, since that economic operator is best placed to comply with the extended producer responsibility obligations”.
Consequently, as a new development, the condition of packaging producer required to comply with EPR may arise through the placing on the market of empty packaging, although only in relation to the following types of packaging: (i) transport packaging; (ii) service packaging; and, (iii) primary production packaging. Apart from these particular cases, the status of producer required to comply with EPR continues to fall (as in the previous legislation) on the party that places the packaged product on the market for the first time.

Based on this scenario, and at all times in accordance with Recital 122 of the EU Packaging Regulation, the Commission has recently had occasion to set forth its opinion on the concept of producer through the Commission Notice Guidance document for Regulation (EU) 2025/40 on packaging and packaging waste, clarifying that the definition of “producer” seeks to identify the economic operator responsible for EPR obligations, whether it is the manufacturer, importer or distributor, in the Member State in which the packaged product is made available for consumption and thereby is expected to become waste.
Consequently, the manufacturer and producer may not always be the same economic operator, and the producer of packaging will depend on: 1) the type of packaging made available on the market, 2) whether it is in the same Member State as it is manufactured, and 3) whether the packaged product is sold to the end user or is further distributed.
In short, the new producer regulation of Regulation 2025/40 introduces a significant change with potential impact on the obliged companies and on producer responsibility organisations (PROs) to which they must adhere. For some companies this obligation may arise and for others it may be extinguished, and PROs may undergo the consequent changes in their member producers.
Companies and PROs will need to assess each situation on a case-by-case basis, pending the publication and entry into force, in the interests of full legal certainty, of the new Royal Decree on Packaging and Packaging Waste, whose legislative process has been initiated by the Government and which is expected to incorporate the new provisions of the EU Packaging Regulation, scheduled to enter into force in August 2026.